BOILO Board Density Explained — What 1000+ kg/m3 Means for Your Furniture

Every BOILO brochure mentions 'density above 1000 kg/m3'. It is the board's headline number, but few buyers know what it means in practice. Here is a simple explanation.

What density means

Density is how much material is packed into a given space. A cubic metre of BOILO weighs more than 1000 kg. The same volume of typical commercial plywood weighs roughly 550 to 750 kg. More material in the same space means a harder, tighter board.

What high density gives you

• Termite resistance. No soft layers or gaps to tunnel through. See why BOILO is used as an anti termite board.
• Screw holding. Hinges and channels grip firmly and stay tight.
• Impact resistance. Edges and faces resist dents.
• Load bearing. Shelves carry weight with less sagging.
• Clean machining. Routed grooves and edges come out sharp.

The trade-offs

High density has practical consequences that your carpenter should plan for:

• Sheets are heavy — allow two people for handling
• Use sharp carbide-tipped blades; blunt tools burn the edge
• Always drill pilot holes before screwing
• Use good hinges rated for heavier shutters
• Price is higher than HDHMR or plywood

How to judge density in the showroom

1. Lift one corner of a BOILO sheet and then an MDF sheet of the same thickness
2. Look at the cut edge — it should be tight and uniform from face to face
3. Press a fingernail into the edge; a dense board barely marks

You can do this comparison yourself at our showroom in Shayampet, Near ARKA School, Hanumakonda, Warangal.

Do you always need the highest density?

No. For wardrobes and furniture in dry rooms, HDHMR at above 850 kg/m3 is dense enough and easier on the budget. Keep BOILO for wet zones, heavy-use areas and places where fire safety matters.

Frequently Asked Questions